No Products in the Cart
RESCUE CLEANER - FOR SLUDGE, CARBON, AND VARNISH REMOVAL IN OIL SYSTEMS
Rescue consists of premium, fast-acting concentrate cleaners. Add directly to compressor lubricant. The cleaner solubilizes contaminants into the lubricant and works to restore the compressor to peak efficiency by removing carbon, varnish and other hydrocarbon-related deposits while the equipment is operating.
Drain contaminants from the system through the oil. Rescue is recommended for use at a ratio of 1 part concentrate to 10 parts lubricant. Rescue is added directly to the existing charge of lubricant – based on the contamination level of the compressor. If the current charge of lubricant inside the compressor is severely deteriorated – drain the oil and add Rescue cleaner to a new charge of synthetic or partial-synthetic lubricant.
ISEL Rescue is made in Jacksonville, Florida and is Non-Toxic/Non-Hazardous.
Add Rescue to your preventative maintenance schedule to extend filter life, improve efficiency, and prevent equipment damage. Also recommended for older or neglected compressors.
DIRECTIONS FOR USE:
1. Determine amount of Rescue required for the compressor
2. Drain oil from the compressor equal to the amount of Rescue being added
3. Add Rescue to the lubricant sump of the compressor up to recommended concentration
4. Operate the compressor as normal for 24-72 Hours. Monitor filters for clogging; replace as needed
5. If the compressor shuts down at any time during the cleaning period, ensure it is run for atleast 30 minutes prior to draining the oil-cleaner mixture
6. Drain the lubricant-cleaner mixture from the compressor while oil is still hot for best results. Oil and contaminants do not drain well when allowed to cool and settle
7. Refill the compressor with high-quality, synthetic lubricant
How much Rescue to use:
| Light Deposits / Standard Used Oil / Preventative Maintenance | 5-10% Concentration |
| Severely Degraded Oil / Minimal Deposits / Reconditioning Maintenance | 10-15% Concentration |
| Heavy Deposits / Standard Used Oil / Clogged Oil Cooler | 15-20% Concentration |
| Worst Case Scenario Severe Deposits / Severely Degraded Oil / Clogged Oil Cooler | 20% Concentration, and may require multiple cleanings |
Excellent preventative maintenance cleaner when it comes time for a fluid changeout, definitely worth running through the system especially if you don't use synthetic fluid or the machine has a questionable maintenance history
Simple oil additive to clean the internals, works well
Cleans system of buildup over time just by running and then draining out
Oil system cleaner, i give it 4 stars, change your fluid regularly and every now and then run cleaner through it
Try it for yourself on an old compressor and see how much black muck drains out at fluid changeout, impressive
Someone purchased a
